Newsletters
Lubricants&Liquids
It takes high quality components to produce high quality cartridges. However, the right lubricants combined with the right cleaning liquids will give your cartridge the finishing quality touch.
The CF-Technologies lubricants and liquids are developed by ICT-COATINGS , our sister company that also applies the necessary coatings for PCR' s, magnetic rollers and doctor blades.
Browse to our products
Download our product list
For wiper blade
ICTDL The aim of ICTDL (drumpo lube) is to reduce the friction between the wiper blade and the drum. ICTDL reduces drum wear by at least 30%. It is a lubricant that is liquid during application and then dries to a powdery, film (dying time:15 min.). The film stays permanently on the wiper blade. The reason for this type of lubricant is that it will not migrage (move off) and therefore the drum will not be fouled. Oil and grease on the other hand do migrate and for this reason are not used. Can be uses on any type of wiper blade. 1 bottle = approx. 250 blades
ICTULTRAGLIDE ICTULTRAGLIDE coating can be used on any type of wiper blade, but specifically on wiper blades of faster printers. ICTULTRAGLIDE reduces the OPCT drum wear. There's no need to use drum powder any more.
ICTWBCLEAN ICTWBCLEAN is is cleaning liquid to be used on wiper blades with greasy coating wihich can not be removed using IPA. This coating does not allow proper use of ULTRAGLIDE. After applying ICTWBCLEAN on these wiper blades, ULTRAGLIDE can be applied without a problem
ICTFR1 Basic foam remover for HP4200,4300 & Canon E30 cartridges
ICTFR2 Final foam remover for HP4200,4300 & Canon E30 cartridges
ISOPARC1000 Solvent based cleaning and degreasing liquid for magnetic rollers, wiper-and doctor blades.
For doctor blade
ISOPARC1000 Solvent based cleaning and degreasing liquid for magnetic rollers, wiper-and doctor blades.
For OPC drum
ICTDRUMPO ICTDRUMPO is used as a lubricant powder between drums and wiper blade. This is important for the first cycle of the drum, avoiding problems such as wiper blade flipping (causing your cartridge to jam).
For magnetic roller
ISOPARC1000 Solvent based cleaning and degreasing liquid for magnetic rollers, wiper-and doctor blades.
For developper roller
ICTCLEANDVRis a solvent based cleaning product developped for all kinds of developper rollers. The rollers are rubbery and soiled from toner and toner additives. The soiling is heavily embedded and very difficult to remove without damage. ICTCLEANDVR cleans the developper roller very efficiently and prevents the roller drying out and becoming hard.
IHPCRDVRCLPUS is a non-hazardous cleaning product without waxes or silicones. It has been developped especially to thoroughly clean heavily soiled and difficult to clean PCR's and developper rollers. IHPCRDVRCLPLUS considerably shortens the cleaning time of PCR's and developer rollers with 15% while increasing the quality of cleaning.
For PCR's
Conductive PCR wax is used for cleaning PCR's and enhancing their electrostatic properties at the same time. The formulation's anti-stick an easy-to-clean properties also improve the PCR's good working. Conductive PCR wax cleans the but also applies a conductive coating allowing the PCR to be used without encountering lowering voltage defects that appear from repeated use. Applied in the right way on a dirty PCR, it will clean and make sur that the tribo-electric charge is at the right level. It leave a thin conductive coating that improves the voltage flow and eliminateds PCR related effects. It instantly removes toner build-up. No special tools are required and the PCR is clean and ready for assembly within 1 minute.
IHPCRDVRCLPUS is a non-hazardous cleaning product without waxes or silicones. It has been developped especially to thoroughly clean heavily soiled and difficult to clean PCR's and developper rollers. IHPCRDVRCLPLUS considerably shortens the cleaning time of PCR's and developer rollers with 15% while increasing the quality of cleaning.
For plastic gears
ICTGG is used to lubricate plastic gears or other rotating items (plastic against plastic). The grease is none conductive, can operate under high temperatures adn will not harden in time. ICT gear grease will not harm the plastic gear thanks to its specific composition. It does not migrate- avoiding fowling of other components.
For magnetic roller contacts, OPC contact pin, PCR clips & metal axcle ICTCG (conductive grease) is a conductive grease used in toner cartridges where lubrication and electrical conductivity are required. The areas where conductive grease should be used are: on the mag roller contacts, OPC contact pin, PCR clips and metal axle.
Browse to our products